Can of Worms
We found a great system to start out with is the 'can of worms.' This worm home is a system of trays, shown in the picture above. You feed your worms in the top tray, and harvest castings from the lower trays.
Bathtub System
To get the worm castings really cranking, worm houses made from old bathtubs are the way to go. We set ours up on a frame for easy access.
To make sure our wormies don't go walkabout, or drown, we put a 5cm layer of gravel at the bottom of the tub. Over the top of the gravel, we put a weed matt and some washed river sand to make sure there is no mixing between the valuable worm castings and the gravel.
Ventilation and aeration is critical. Wormies need to be able to breathe easy! One way we increased air flow was by cutting 6 slits in the bottom of the tub. We also have gaps between the tub and the lid, to allow oxygen to pass across the top of the worm farm, but still keep out excess water during heavy rains. And we areate the worm bed whenever we feed the worms, or add water to the system, by lightly 'fluffing' the material in the bed with our hands or a trowel.
No comments:
Post a Comment